| Table No. 3-C Mechanical Permit
|
Administering Department: Planning & Inspection
tel: (408) 615-2420 fax: (408) 241-3823 |
| |
| Minimum Permit Fee: $50.00 |
| |
| Permit Issuance |
| For issuing
each supplemental permit for which the original permit has not
expired, been canceled or finaled |
$7.25 |
| |
|
| New Buildings |
|
| The following
fees shall include complete plumbing system on each building. |
|
| New Commercial
buildings. Per square foot (0.09m3) |
$0.08 |
| New Residential
buildings. Per square foot (0.09m3) |
$0.05 |
| For other
types of alterations, additions and modifications to existing
buildings, use Unit Fee Schedule. |
|
| |
|
| |
|
| Unit Fee
Schedule |
|
| 1. |
Furnaces
|
|
| |
For the installation
or relocation of each forced-air or gravity-type furnace or
burner, including ducts and vents attached to such appliance,
up to and including 100,000 Btu/h (29.3 kW) |
14.80 |
| |
For the installation
or relocation of each forced-air or gravity-type furnace or
burner, including ducts and vents attached to such appliance,
over 100,000 Btu/h (29.3 kW) |
18.20 |
| |
For the installation
or relocation of each floor furnace, including vent |
14.80 |
| |
For the installation
or relocation of each suspended heater, recessed wall heater
or floor-mounted unit heater |
14.80 |
| |
|
|
| 2. |
Appliance Vents
|
|
| |
For the installation,
relocation or replacement of each appliance vent installed and
not included in an appliance permit |
7.25 |
| |
|
|
| 3. |
Repairs or Additions
|
|
| |
For the repair of,
alteration of, or addition to each heating appliance, refrigeration
unit, cooling unit, absorption unit, or each heating, cooling,
absorption, or evaporative cooling system, including installation
of controls regulated by the Mechanical Code |
13.70 |
| |
|
|
| 4. |
Boilers, Compressors
and Absorption Systems
|
|
| |
For the installation
or relocation of each boiler or compressor to and including
three horsepower (10.6 kW), or each absorption system to and
including 100,000 Btu/h (29.3 kW) |
14.70 |
| |
For the installation
or relocation of each boiler or compressor over three horsepower
(10.6 kW) to and including 15 horsepower (52.7 kW), or each
absorption system over 100,000 Btu/h (29.3 kW) to and including
500,000 Btu/h (146.6 kW) |
27.15 |
| |
For the installation
or relocation of each boiler or compressor over 15 horsepower
(52.7 kW) to and including 30 horsepower (105.5 kW), or each
absorption system over 500,000 Btu/h (146.6 kW) to and including
1,000,000 Btu/h (293.1 kW) |
37.25 |
| |
For the installation
or relocation of each boiler or compressor over 30 horsepower
(105.5 kW) to and including 50 horsepower (176 kW), or each
absorption system over 1,000,000 Btu/h (293.1 kW) to and including
1,750,000 Btu/h (512.9 kW) |
55.45 |
| |
For the installation
or relocation of each boiler or compressor over 50 horsepower
(176 kW), or each absorption system over 1,750,000 Btu/h (512.9
kW) |
92.65 |
| |
|
|
| 5. |
Air Handlers
|
|
| |
For each air-handling
unit to and including 10,000 cubic feet per minute (cfm) (4719
L/s), including ducts attached thereto |
10.65 |
| |
Note: This fee does
not apply to an air-handling unit which is a portion of a factory-assembled
appliance, cooling unit, evaporative cooler or absorption unit
for which a permit is required elsewhere in the Mechanical code.
For each air-handling unit over 10,000 cfm (4719 L/s) |
18.10 |
| |
|
|
| 6. |
Evaporative Coolers |
|
| |
For each evaporative
cooler other than portable type |
10.65 |
| |
|
|
| 7. |
Ventilation and
Exhaust
|
|
| |
For each ventilation
fan connected to a single duct |
7.25 |
| |
For each ventilation
system which is not a portion of any heating or air-conditioning
system authorized by a permit |
10.65 |
| |
For the installation
of each hood which is served by mechanical exhaust, including
the ducts for such hood |
10.65 |
| |
|
|
| 8. |
Incinerators |
|
| |
For the installation
or relocation of each domestic-type incinerator |
18.20 |
| |
For the installation
or relocation of each commercial or industrial-type incinerator |
14.50 |
| |
|
|
| 9. |
Miscellaneous
|
|
| |
For each appliance
or piece of equipment regulated by the Mechanical Code but not
classed in other appliance categories, or for which no other
fee is listed in this table |
10.65 |
| |
|
|
| Other
Inspections and Fees |
|
| 1. |
Inspections outside
of normal business hours (minimum charge--two hours) |
$300.00* |
| |
|
|
| 2. |
Re-inspection fees
assessed under provisions of Section 305.8 |
$80.00 per hour* |
| |
|
|
| 3. |
Inspections for
which no fee is specifically indicated (minimum charge--one-half
hour) |
$80.00 per hour* |
| |
|
|
| 4. |
Additional plan
review required by changes, additionsor revisions to approved
plans
(minimum charge--one-half hour) |
$100.00 per hour* |
| |
|
| * Or the
total hourly cost to the jurisdiction, whichever is the greatest.
This cost shall include supervision, overhead, equipment, hourly
wages and fringe benefits of the employees involved. |
| |
|
| |
|
| [ More Links ] |
Building
Permit Fees
Table No. 3-A Building Permit Fees
Table
No. 3-B Electrical Permit Fees
Table
No. 3-D Plumbing Permit Fees
Table
No. 3-G Grading Plan Review Fees
Table
No. 3-H Grading Permit Fees |
| |
| |
| |
Bookmark & Share
RSS
RSS